25 models · 61 versions · 2004–2026
Audi remote ECU tunes
Every Audi model below is supported by HP Tuners, so we can tune it remotely: you read the car with your own interface, a tuner builds your calibration by hand and sends it back within three hours, and you pay only once it is delivered. Stage 1 is $250, Stage 2 $450 and Stage 3 $650.
Supported models
Every Audi model HP Tuners supports
25 models and 61 listed versions, per HP Tuners' supported-vehicle list (June 2026). Linked models have their own page with the full version table.
| Model | Years | Versions | Interface |
|---|---|---|---|
| A1 | 2010–2018 | 4 versions · 1.0L, 1.4L, 2.0L | MPVI2 or newer |
| A3 | 2004–2018 | 10 versions · 1.0L, 1.2L, 1.4L, 1.8L, 2.0L | MPVI2 or newer |
| A4 | 2005–2018 | 9 versions · 1.8L, 2.0L, 3.0L | MPVI2 or newer |
| A5 | 2007–2018 | 4 versions · 2.0L, 3.0L | MPVI2 or newer |
| A6 | 2008–2018 | 3 versions · 2.0L, 3.0L | MPVI2 or newer |
| A7 | 2010–2017 | 1 version · 3.0L | MPVI2 or newer |
| A8 | 2010–2018 | 2 versions · 3.0L, 4.0L | MPVI2 or newer |
| Q2 | 2017–2018 | Q2 1.4L TFSI (MED17.5.25) (2017–2018) | MPVI2 or newer |
| Q3 | 2008–2018 | 3 versions · 1.4L, 2.0L | MPVI2 or newer |
| Q5 | 2011–2018 | 4 versions · 2.0L, 3.0L | MPVI2 or newer |
| RS3 | 2016–2026 | 1 version · 2.5L | MPVI2 or newer |
| RS4 | 2012–2017 | 1 version · 4.2L | MPVI2 or newer |
| RS5 | 2010–2017 | 1 version · 4.2L | MPVI2 or newer |
| RS6 | 2013–2018 | 1 version · 4.0L | MPVI2 or newer |
| RS7 | 2013–2018 | 1 version · 4.0L | MPVI2 or newer |
| RSQ3 | 2013–2026 | 2 versions · 2.5L | MPVI2 or newer |
| S3 | 2006–2019 | 2 versions · 2.0L | MPVI2 or newer |
| S4 | 2009–2016 | 2 versions · 3.0L | MPVI2 or newer |
| S5 | 2009–2017 | 2 versions · 3.0L | MPVI2 or newer |
| S6 | 2012–2018 | 1 version · 4.0L | MPVI2 or newer |
| S7 | 2012–2018 | 1 version · 4.0L | MPVI2 or newer |
| S8 | 2012–2018 | 1 version · 4.0L | MPVI2 or newer |
| TT | 2007–2018 | 2 versions · 2.0L | MPVI2 or newer |
| TTRS | 2016–2026 | 1 version · 2.5L | MPVI2 or newer |
| TTS | 2007–2020 | TTS 2.0 TFSI (MED9.1/SIMOS18) (2007–2020) | MPVI2 or newer |
Check your exact car on HP Tuners' vehicle list before you buy credits.
Tuning data by engine
Typical gains for the Audi, by engine
- Audi A4 / A5 / A6 / A7 / A8 / Q5 3.0 TFSI (supercharged)Stock 306 hpStage 1 +80–115 hp
- Audi A4 / A5 / A6 / Q5 2.0 TFSI (B8 / C7)Stock 208 hpStage 1 +25–60 hp
- Audi RS4 / RS5 4.2 FSI (B8 / B8.5)Stock 444 hpStage 1 +15–20 hp
- Audi RS6 / RS7 4.0 TFSI (C7)Stock 552 hpStage 1 +100–130 hp
- Audi S6 / S7 / S8 / A8 4.0 TFSI (C7 / D4)Stock 414 hpStage 1 +100–140 hp
- Audi TT 2.0 TFSI (8J / 8S)Stock 208 hpStage 1 +25–55 hp
Typical gains from published dyno results; your car will vary with fuel, mods and conditions.
Before you order
What you need to tune a Audi
- An HP Tuners interface. Any MPVI2, MPVI2+, MPVI3 or MPVI4 works; we recommend the MPVI4 if you are buying new. Our guide covers buying and setting it up.
- HP Tuners credits to license your car the first time you write a tune. The table on each model page lists the credit cost.
- Your stock file and a datalog from VCM Suite, HP Tuners' free software.