5 models · 10 versions · 2005–2021
Toyota remote ECU tunes
Every Toyota model below is supported by HP Tuners, so we can tune it remotely: you read the car with your own interface, a tuner builds your calibration by hand and sends it back within three hours, and you pay only once it is delivered. Stage 1 is $250, Stage 2 $450 and Stage 3 $650.
Supported models
Every Toyota model HP Tuners supports
5 models and 10 listed versions, per HP Tuners' supported-vehicle list (June 2026). Linked models have their own page with the full version table.
| Model | Years | Versions | Interface |
|---|---|---|---|
| Hilux | 2015–2020 | 2 versions · 2.4L, 2.8L | MPVI2 or newer |
| Land Cruiser | 2007–2018 | 3 versions · 4.5L, 5.7L | MPVI2 or newer |
| Sequoia | 2007–2018 | 1 version · 5.7L | MPVI2 or newer |
| Tacoma | 2005–2015 | 1 version · 4.0L | MPVI2 or newer |
| Tundra | 2007–2021 | 3 versions · 5.7L | MPVI2 or newer |
Check your exact car on HP Tuners' vehicle list before you buy credits.
Tuning data by engine
Typical gains for the Toyota, by engine
- Toyota Tacoma 4.0 V6 (1GR-FE)Stock 236 hpStage 1 +15–20 hp
- Toyota Tundra / Sequoia / Land Cruiser 5.7 (3UR-FE)Stock 381 hpStage 1 +10–20 hp
Typical gains from published dyno results; your car will vary with fuel, mods and conditions.
Before you order
What you need to tune a Toyota
- An HP Tuners interface. Any MPVI2, MPVI2+, MPVI3 or MPVI4 works; we recommend the MPVI4 if you are buying new. Our guide covers buying and setting it up.
- HP Tuners credits to license your car the first time you write a tune. The table on each model page lists the credit cost.
- Your stock file and a datalog from VCM Suite, HP Tuners' free software.