4 models · 18 versions · 2011–2024
Ram remote ECU tunes
Every Ram model below is supported by HP Tuners, so we can tune it remotely: you read the car with your own interface, a tuner builds your calibration by hand and sends it back within three hours, and you pay only once it is delivered. Stage 1 is $250, Stage 2 $450 and Stage 3 $650.
Supported models
Every Ram model HP Tuners supports
4 models and 18 listed versions, per HP Tuners' supported-vehicle list (June 2026). Linked models have their own page with the full version table.
| Model | Years | Versions | Interface |
|---|---|---|---|
| 1500 | 2011–2024 | 8 versions · 3.0L, 3.6L, 3.7L, 4.7L, 5.7L, 6.2L | MPVI3/4 for some years |
| 2500/3500 | 2011–2024 | 8 versions · 5.7L, 6.4L, 6.7L | MPVI3/4 for some years |
| Dakota | 2011 | Dakota 3.7, 4.7 (2011) | MPVI2 or newer |
| Rampage | 2022–2023 | RAM Rampage 2.0L GME Hurricane I4 Turbo (2022–2023) | MPVI3 or MPVI4 |
Check your exact car on HP Tuners' vehicle list before you buy credits.
Tuning data by engine
Typical gains for the Ram, by engine
- Dodge/RAM 2500/3500 6.7 Cummins (2007.5-2012)Stock 350 hpStage 1 +30–65 hp
- RAM 1500 TRX 6.2 SuperchargedStock 702 hpStage 1 +25–45 hp
- RAM 2500/3500 6.4 HEMIStock 410 hpStage 1 +15–25 hp
- RAM 2500/3500 6.7 Cummins (2013-2018)Stock 370 hpStage 1 +30–60 hp
- RAM 2500/3500 6.7 Cummins (2019-2024)Stock 370 hpStage 1 +30–70 hp
Typical gains from published dyno results; your car will vary with fuel, mods and conditions.
Before you order
What you need to tune a Ram
- An HP Tuners interface. 3 of the 18 versions need an MPVI3 or MPVI4; the rest work with an MPVI2 as well. Our guide covers buying and setting it up.
- HP Tuners credits to license your car the first time you write a tune. The table on each model page lists the credit cost.
- Your stock file and a datalog from VCM Suite, HP Tuners' free software.