26 models · 30 versions · 2005+
Nissan remote ECU tunes
Every Nissan model below is supported by HP Tuners, so we can tune it remotely: you read the car with your own interface, a tuner builds your calibration by hand and sends it back within three hours, and you pay only once it is delivered. Stage 1 is $250, Stage 2 $450 and Stage 3 $650.
Supported models
Every Nissan model HP Tuners supports
26 models and 30 listed versions, per HP Tuners' supported-vehicle list (June 2026). Linked models have their own page with the full version table.
| Model | Years | Versions | Interface |
|---|---|---|---|
| 350Z | 2007–2009 | 1 version | MPVI2 or newer |
| 370Z | 2009–2020 | 1 version | MPVI2 or newer |
| Altima | 2007–2019 | Altima (VQ35DE) (SH_7058 Only) (2007–2019) | MPVI2 or newer |
| Armada | 2005–2018 | 1 version | MPVI2 or newer |
| Cima | 2012–2018 | Cima (VQ35HR) (2012–2018) | MPVI2 or newer |
| Elgrand | 2007–2010 | Elgrand (VQ35DE) (2007–2010) | MPVI2 or newer |
| Frontier | 2005–2019 | Frontier (VQ40DE) (2005–2019) | MPVI2 or newer |
| Fuga | 2007–2009 | Fuga (VQ25HR and VQ35HR) (2007–2009) | MPVI2 or newer |
| GT-R | 2009–2010 | 1 version | MPVI2 or newer |
| Juke | 2011–2018 | Juke (HR16DE – Non-turbo) (SH_7058 Only) (2011–2018) | MPVI2 or newer |
| Maxima | 2007–2014 | Maxima (VQ35DE) (SH_7058 Only) (2007–2014) | MPVI2 or newer |
| Micra | 2010–2018 | Micra (HR16DE) (2010–2018) | MPVI2 or newer |
| Murano | 2008–2014 | Murano (VQ35DE and QR25DE) (SH_7058 Only) (2008–2014) | MPVI2 or newer |
| Navara | 2005–2019 | Navara (VQ40DE) (2005–2019) | MPVI2 or newer |
| NV2500/NV3500 | 2011–2018 | NV2500/NV3500 (VK56DE) (2011–2018) | MPVI2 or newer |
| Pathfinder | 2005–2018 | Pathfinder (VQ35DE and VK56DE) (2005–2018) | MPVI2 or newer |
| Patrol | 2010+ | 2 versions | MPVI2 or newer |
| Qashqai | 2006–2013 | Qashqai (MR20DE) (2006–2013) | MPVI2 or newer |
| Quest | 2007–2017 | Quest (VQ35DE) (2007–2017) | MPVI2 or newer |
| Rogue | 2007–2013 | Rogue (QR25DE) (SH_7058 Only) (2007–2013) | MPVI2 or newer |
| Sentra | 2007–2012 | Sentra (MR20DE and QR25DE) (SH_7058 Only) (2007–2012) | MPVI2 or newer |
| Skyline | 2006–2018 | 3 versions | MPVI2 or newer |
| Teana | 2007–2018 | Teana (VQ35DE) (2007–2018) | MPVI2 or newer |
| Titan | 2005–2019 | 2 versions · 5.0L | MPVI2 or newer |
| X-Trail | 2007–2013 | X-Trail (MR20DE and QR25DE) (2007–2013) | MPVI2 or newer |
| Xterra | 2005–2015 | Xterra (VQ40DE) (2005–2015) | MPVI2 or newer |
Check your exact car on HP Tuners' vehicle list before you buy credits.
Tuning data by engine
Typical gains for the Nissan, by engine
Typical gains from published dyno results; your car will vary with fuel, mods and conditions.
Before you order
What you need to tune a Nissan
- An HP Tuners interface. Any MPVI2, MPVI2+, MPVI3 or MPVI4 works; we recommend the MPVI4 if you are buying new. Our guide covers buying and setting it up.
- HP Tuners credits to license your car the first time you write a tune. The table on each model page lists the credit cost.
- Your stock file and a datalog from VCM Suite, HP Tuners' free software.