6 models · 17 versions · 1999–2020
Holden remote ECU tunes
Every Holden model below is supported by HP Tuners, so we can tune it remotely: you read the car with your own interface, a tuner builds your calibration by hand and sends it back within three hours, and you pay only once it is delivered. Stage 1 is $250, Stage 2 $450 and Stage 3 $650.
Supported models
Every Holden model HP Tuners supports
6 models and 17 listed versions, per HP Tuners' supported-vehicle list (June 2026). Linked models have their own page with the full version table.
| Model | Years | Versions | Interface |
|---|---|---|---|
| Captiva | 2007–2009 | Captiva 3.2 (2007–2009) | MPVI2 or newer |
| Colorado | 2012–2020 | 2 versions · 2.8L | MPVI2 or newer |
| Commodore | 1999–2019 | 10 versions · 2.0L, 3.6L, 5.7L, 6.0L, 6.2L | MPVI2 or newer |
| Cruze | 2012–2019 | 2 versions · 1.4L, 1.6L | MPVI2 or newer |
| Monaro | 2001–2005 | Monaro 5.7 (2001–2005) | MPVI2 or newer |
| Rodeo | 2006–2007 | Rodeo 3.6 (2006–2007) | MPVI2 or newer |
Check your exact car on HP Tuners' vehicle list before you buy credits.
Tuning data by engine
Typical gains for the Holden, by engine
Typical gains from published dyno results; your car will vary with fuel, mods and conditions.
Before you order
What you need to tune a Holden
- An HP Tuners interface. Any MPVI2, MPVI2+, MPVI3 or MPVI4 works; we recommend the MPVI4 if you are buying new. Our guide covers buying and setting it up.
- HP Tuners credits to license your car the first time you write a tune. The table on each model page lists the credit cost.
- Your stock file and a datalog from VCM Suite, HP Tuners' free software.